Xiamen Pinhe Precision Technology Co., Ltd
Add to Cart
Product Introduction
Product Parameters
| Block Entry into Machine | From side (as picture shown above) |
| Trolley Movement | Trolley (block) going up |
| Dimension | 6M(L) * 4M(W) * 6.5M(H) |
| Motors | Siemens Servo Motor Control System Main Motor 60kw |
| Total Power | 300kw |
| Processing Size | L3400mm * W2000m * H2200mm |
| Cutting Wire Speed | 0-35m/min |
| Cutting Down Feed | 0-25cm/h |
| Roller Material | Aviation Aluminum Roller ф350mm |
| Wire Storage | 30-50km |
| G.W | 45 Tons |
| Bearing Housing | German NSK Bearing with High Speed Housing |
| Wire Diameter | 0.38mm - 0.8mm |
| Main Body | Cast Iron |
| PLC | AI Automatic Control System of Siemens |
How many rolls of wire are needed to cut a block of stone?
Pinhe's winding wheels can wind 30 kilometers of 0.55mm diamond wire, and the longer the wire, the greater the cutting area. If the stone is hard or there is a break, the long wire ensures that a stone block can be completely cut without needing to replace the wire spool. Since the diamond wire is very fine, replacing it mid-cut if it's not enough would be very troublesome, and reconnecting the wire could easily result in bent slabs or wire marks. Therefore, Pinhe uses 30 kilometers of diamond wire to cut 3 to 4 blocks of medium-soft material, with a cutting area exceeding 1500 square meters.