Xiamen Pinhe Precision Technology Co., Ltd
Add to Cart
Product Introduction
PINHE Modular Gulf-Style Lifting Wire Saw – Next-Level Efficiency for Modern Stone Processing
The PINHE Gulf-Style Lifting Wire Saw redefines precision stone cutting with a modular, high-efficiency system engineered for today’s advanced stone fabrication facilities. Designed to reduce setup time and operational costs, this cutting-edge solution is perfect for manufacturers seeking fast deployment and long-term performance in high-volume production environments.
With its factory-installed precision-cast support columns and a dual-level operator platform, the system eliminates the need for heavy concrete foundations or additional reinforcement structures. This smart design not only shortens installation timelines but also significantly lowers upfront construction costs—ideal for rapid upgrades or new plant installations.
Built for Performance, Engineered for Versatility
The latest PINHE lifting wire saw isn’t just modular—it’s built tough for continuous, industrial-grade cutting. Designed for heavy-duty performance, the machine supports dual-directional feeding, allowing stone blocks to be loaded from either the front or the side. This flexibility enhances block handling, speeds up workflow, and accommodates a wide range of block dimensions and stone types.
Whether you're retrofitting existing infrastructure or establishing a new production line, the PINHE modular design provides superior adaptability and operational efficiency. Its rugged construction, combined with intuitive usability, makes it the ideal choice for achieving maximum cutting precision, increased throughput, and streamlined operations.
Effortless Plant Modernization: Upgrade from Traditional Gang Saws to the PINHE Gulf-Style Lifting Wire Saw
Transforming your stone processing facility has never been easier. Replacing outdated gang saws with the advanced PINHE Gulf-style lifting wire saw offers a quick, low-cost path to modern, high-efficiency cutting. The upgrade process is straightforward—remove the old gang saws and install the new wire saw directly onto your existing foundation, with no need for major structural changes or additional civil works.
This smart retrofit solution allows you to continue using your current block trolleys and slab handling equipment, maintaining your established workflow with zero disruption. Installation time is dramatically reduced, labor and construction costs are minimized, and production downtime is kept to an absolute minimum.
Whether you're revamping an older facility or looking to increase cutting capacity, the PINHE Gulf-style lifting system provides precision cutting, greater flexibility, and faster output—all while keeping your plant layout and infrastructure intact. It’s the ultimate cost-effective upgrade for stone manufacturers aiming to stay competitive with minimal investment and maximum return.
Built to Last: Reinforced Durability in the New PINHE Gulf-Style Lifting Wire Saw
Engineered for endurance, the latest PINHE Gulf-style lifting wire saw has been upgraded with cutting-edge durability features—making it ideal for high-demand stone processing environments, especially those involving water-intensive operations.
A key enhancement is the improved waterproofing system for the wire take-up and release zones. Both the wire entry and exit points are now housed in fully sealed enclosures, effectively blocking moisture and preventing corrosion of vital mechanical parts. This design ensures continuous, safe operation in wet and humid environments.
To reduce wear and enhance longevity, the saw includes an oil-lubricated precision guide track that decreases friction and enables smoother wire motion. This not only improves operational efficiency but also lowers the frequency of maintenance. For added protection, strategically placed water-resistant deflectors around the motor assembly shield sensitive electrical systems from mist and splash damage.
These innovations combine to make the upgraded PINHE wire saw a rugged, low-maintenance solution for high-volume stone cutting operations. Whether you're working in challenging climates or demanding production lines, this system delivers reliable performance, reduced downtime, and long-term value.
The newly upgraded PINHE intelligent control system is seamlessly connected to an AI-driven cloud monitoring platform, delivering real-time visibility into machine operations and cutting performance from any remote location. Integrated with ultra-high-definition smart cameras and millimeter-wave radar sensors, the system enables precise, automated supervision across every phase of the cutting cycle.
Utilizing live data inputs, the system automatically fine-tunes cutting parameters, creating a fully closed-loop control environment. This ensures optimal cutting efficiency, superior surface finish, and minimal deviation. By leveraging machine learning algorithms, the system continuously refines cutting techniques to match material variations and production demands.
This advanced automation reduces operator dependency, lowers material waste, and significantly increases consistency in output—making it an ideal solution for modern stone processing plants aiming to scale productivity while maintaining high-precision standards.
Product Parameters
| Block Entry into Machine | From side (as picture shown above) |
| Trolley Movement | Trolley (block) going up |
| Dimension | 6M(L) * 4M(W) * 6.5M(H) |
| Motors | Siemens Servo Motor Control System Main Motor 60kw |
| Total Power | 300kw |
| Processing Size | L3400mm * W2000m * H2200mm |
| Cutting Wire Speed | 0-35m/min |
| Cutting Down Feed | 0-25cm/h |
| Roller Material | Aviation Aluminum Roller ф350mm |
| Wire Storage | 30-50km |
| G.W | 45 Tons |
| Bearing Housing | German NSK Bearing with High Speed Housing |
| Wire Diameter | 0.38mm - 0.8mm |
| Main Body | Cast Iron |
| PLC | AI Automatic Control System of Siemens |
Pinhe Precision stands at the forefront of diamond wire saw technology for stone cutting, backed by over six years of dedicated R&D. Now entering our ninth-generation product line, we proudly hold more than 50 patents, including over 20 invention patents and two software copyrights. This solid foundation of proprietary technology secures our position as true innovators—not imitators. While others may attempt to mimic our machines, they can’t match our ability to engineer real solutions to real challenges. Our experienced development team continues to push the boundaries of performance and reliability.
At Pinhe, customer satisfaction is more than a promise—it’s a guarantee. We back every machine with a comprehensive support program, treating each unit like our own. Our nationwide service network includes over 40 technicians in Shuitou and 10+ in Yunfu, all available around the clock. For most service requests, we offer on-site response within one hour and issue resolution within eight hours, ensuring minimal disruption and maximum machine uptime.
Pinhe machines are tested where it matters most—on the job site. Our second-generation down-pressing model has been in continuous operation since 2019, while our third-generation lifting system has logged over 3.5 years of proven performance. This kind of long-term, real-world testing allows us to refine our technology and deliver tried-and-true reliability that theory alone can’t replicate.
Our cutting systems are built for speed, stability, and precision. Starting with the fourth generation, Pinhe integrated high-speed spindles, aerospace-grade aluminum guide wheels, and single-piece cast frames to achieve rotation speeds of up to 2,000 RPM. This advanced construction delivers smoother, faster cuts with superior accuracy and structural integrity. Today, more than 70% of premium marble in Shuitou is processed using Pinhe machines—clear proof of our product’s industry trust and precision.
With Pinhe, efficiency isn’t just a feature—it’s a cost-saving advantage. Our robust systems reduce diamond wire breakage, minimize consumables, and cut down on maintenance. Customers typically save 20–30% on operating expenses, including wire, rollers, and labor, when compared to standard alternatives. For popular materials like Baiyulan and Altman, cutting costs range from 9–12 RMB/m², while tougher stones like Venice Brown average around 15 RMB/m²—delivering real savings and better margins.
With over 80 units in Shuitou and 29 in Yunfu, plus 20+ machines currently in production, Pinhe is a recognized leader in China's stone machinery market. Globally, 25 machines are already operational, with another 20+ units headed for international deployment. Our growing footprint ensures worldwide support and consistent product performance—wherever your business operates.
Pinhe Precision is more than just a machinery brand—we’re your strategic partner. Built on values of honesty, innovation, quality, and customer dedication, we aim to help your business succeed for the long haul. From robust engineering to reliable support, Pinhe delivers cutting-edge solutions that grow with your company.