Xiamen Pinhe Precision Technology Co., Ltd
Add to Cart
Product Introduction
Product Parameters
| Block Entry into Machine | From side (as picture shown above) |
| Trolley Movement | Trolley (block) going up |
| Dimension | 6M(L) * 4M(W) * 6.5M(H) |
| Motors | Siemens Servo Motor Control System Main Motor 60kw |
| Total Power | 300kw |
| Processing Size | L3400mm * W2000m * H2200mm |
| Cutting Wire Speed | 0-35m/min |
| Cutting Down Feed | 0-25cm/h |
| Roller Material | Aviation Aluminum Roller ф350mm |
| Wire Storage | 30-50km |
| G.W | 45 Tons |
| Bearing Housing | German NSK Bearing with High Speed Housing |
| Wire Diameter | 0.38mm - 0.8mm |
| Main Body | Cast Iron |
| PLC | AI Automatic Control System of Siemens |
How is the flatness of the slabs cut by a wire saw, and is there a need for calibration?
The flatness of the slabs processed by a wire saw fully meets the requirements, and normally, slabs cut to completion do not need calibration, except in cases of malfunction that require special treatment. On a slab surface of 2000x3000mm, the flatness is ≤0.2mm. Generally speaking, for example, if a slab needs to have a final polished thickness of 18mm, it is only necessary to reserve 0.3mm for polishing and cut the slab at 18.3mm. After polishing, the slab will have the required thickness of 18mm. If you want to be more conservative, you can reserve a bit more, like 0.5mm.