Xiamen Pinhe Precision Technology Co., Ltd
Add to Cart
Product Introduction
F2034 Super Thin Multi Wire Saw, an amazing new machine developed by Pinhe Precision defining the next generation stone cutting technology, with 0.3-0.8mm thin diamond wire brings yield rate more than 97%. It's the next machine of yours to cut block to slabs for much more benefits as follows:
Product Parameters
| Model No. | F2034 Generation 6 (Wire mesh pressing type) |
| Block Entry into Machine | From side front&side |
| Trolley Movement | Trolley (block) going up |
| Position occupied | 8m(L)*6m(W)*6.5m(H) |
| Motors | Siemens Servo Motor Control System Main Motor 60kw |
| Total Power | 300kw |
| Maximum spindle speed | 2000rpm |
| Processing Size | L3400mm * W2000m * H2250mm |
| Processing thickness | 15-30mm |
| Cutting Wire Speed | 0-30m/s |
| Cutting Down Feed (Soft material) |
12-15cm/h |
| Cutting Down Feed (Middle hard material) |
8-20cm/h |
| Cutting Down Feed (Hard material) |
1-8cm/h |
| Roller Material | Aviation Aluminum Roller ф350mm |
| Wire Storage | 30-50km |
| G.W | 60 Tons |
| Wire Diameter | 0.38mm - 0.8mm |
| Foundation | Prepare the concrete ground and fix machine to it |
| PLC | Control System of Siemens |
Why choosing Pinhe Precision?
1. As the founding enterprise of stone wire saws, Pinhe Precision Technology has undergone more than six years of research and development. The equipment has been iterated to the ninth generation, with more than fifty patents, including more than twenty invention patents and two software copyrights, avoiding subsequent intellectual property disputes and reserving the rights to prosecute infringing enterprises. Pinhe Precision has always been based on continuous innovation and upgrading, constantly increasing investment in research and development, and establishing a strong R & D team. There is a lot of room for future equipment upgrades. If it is just copying, it is difficult for the equipment to make progress in iterations, and it is difficult to solve problems when problems occur.
2. Pinhe Precision has always regarded serving customers as the fundamental. It cares for the equipment like its own child, understands and recognizes it. It knows that in the initial stage of this new equipment, it needs to bring good services to customers. Therefore, after several years of cultivation, Pinhe now has a professional after-sales team (more than forty people in Shuitou and more than ten people in Yunfu area, which makes customers who choose Pinhe worry less and has established a good reputation in the market. Pinhe's after-sales staff is on standby 24 hours. Pinhe promises that if there is any fault in the equipment, Pinhe's after-sales team must arrive at the customer's factory for inspection and maintenance within one hour. In principle, the machine cannot be shut down for more than eight hours without special reasons. It provides necessary after-sales guarantee for customers who purchase Pinhe equipment.
3. The longest time of equipment in use: Pinhe's second-generation equipment (down-pressing type) has been used for five years since 2019, and the third-generation machine (lifting machine) has been used for three and a half years. It has carried out sufficient violent tests on the equipment, revealing a series of problems and making upgrades and improvements, which is the basis for the continuous upgrading of the equipment in the later stage. This is a condition that no other manufacturer has.
4. Parameters of Pinhe equipment: Pinhe Precision has experienced several generations of machine tests and deeply understands the importance of speed to this equipment. Therefore, since the fourth generation, Pinhe has been pursuing line speed. Pinhe Precision adopts integral castings, high-speed bearing boxes and aviation aluminum guide wheels, and the maximum rotational speed of the equipment can reach 2,000 revolutions per minute. Because high line speed has very high requirements for the overall equipment and very high precision processing of the equipment, it causes Pinhe's cost to be much higher than that of other manufacturers, but it also ensures the stability of the equipment and a wider variety of cut stone materials. It is not completely statistically that more than 70% of the hard and expensive marble in Shuitou is basically processed on the Pinhe machine, because hard stones take a long time to cut stones, and the requirements for the overall stability of the equipment are extremely high, greatly reducing the risk of cutting.
5. Low processing cost. Due to the stability of the equipment and the low wire breakage rate, coupled with good after-sales guarantee and the advantages of the overall equipment design, it can ensure the high attendance rate of the equipment. The cost of diamond wire, roller and worker wages is significantly lower than that of competing products by 20% to 30%. For cutting ordinary stones, such as Baiyulan and Altman, the average processing cost (calculated monthly) is 9-12 yuan/square meter, and for medium-hard materials, such as Venice Brown, it is about 15 yuan.
6. High market share. At present, Pinhe has installed and used more than fifty units in Shuitou, 19 units in Yunfu, and more than twenty units in backlog orders. In addition, Pinhe Precision has vigorously deployed the foreign market on the premise of relatively stable domestic equipment. Five units have been used in the foreign market, and there are more than twenty units that have been shipped and in backlog orders, which also guarantees the sustainability of Pinhe's future development and provides the continuity of services for manufacturers who will buy Pinhe equipment in the future.
7. The corporate culture of Pinhe: Pinhe Precision insists on people-oriented, quality first, continuous innovation, and taking meeting customer needs as the core, and insists on serving every customer who trusts and chooses Pinhe well